 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) SM2T series Transient Voltage Suppressor: TRANSIL TM FEATURES AND BENEFITS s s s s s s High Peak pulse power: 200 W (10/1000 s ) 1000 W ( 8/20 s) Stand-off voltage range 5 to 24V Unidirectional types Low clamping factor VCL/VBR Fast response time 1.0mm overall component height A K DESCRIPTION The SM2T series are Transil diodes designed specifically for portable equipment and miniaturized electronics devices subject to ESD transient overvoltages. Fully compatible with pick and place equipment and inspectable soldering joints. DO-216AA (ST mite) ABSOLUTE RATINGS (Tamb = 25C) Symbol PPP P IFSM Tstg Tj TL Parameter Peak pulse power dissipation (see note 1) Power dissipation on infinitive heatsink Non repetitive surge peak forward current Storage temperature range Maximum operating junction temperature Lead solder temperature (10 seconds duration) Tj initial = Tamb Tamb = 100C tp = 10 ms Tj initial = Tamb Value 200 2.5 25 - 65 to + 175 150 260 Unit W W A C C Note 1: 10/1000 s pulse waveform. THERMAL RESISTANCES Symbol Rth (j-t) Rth (j-a) Junction to tab Junction to ambient on PCB with recommended pad layout Parameter Value 20 250 Unit C/W C/W April 2002 - Ed: 1A 1/5 SM2T series ELECTRICAL CHARACTERISTICS (Tamb = 25C) Symbol VRM VBR VCL IRM IPP Parameter Stand-off voltage Breakdown voltage Clamping voltage Leakage current @ VRM Peak pulse current Voltage temperature coefficient VCL VBR V RM IF I VF I RM V T I PP Types SM2T6V8A SM2T14A SM2T18A SM2T27A IRM max @ VRM 50A 1A 1A 1A 5V 12V 16V 24V VBR min @ IR 6.4V 13.3V 17.1V 25.7V 10 mA 1 mA 1 mA 1 mA VCL max @ IPP Note 1 9.2V 19.9V 26V 38.9V 19.6A 9.0A 7A 4.6A T max 10-4/C 5.7 8.3 8.8 9.6 C typ at 0V 1600pF 650pF 500pF 350pF Note 1: 10/1000s pulse waveform. Fig. 1: Peak pulse power versus exponential pulse duration. PPP(W) 1.E+04 Tj initial = 25C Fig. 2: Relative variation of peak pulse power versus initial junction temperature. % 110 100 90 80 1.E+03 70 60 50 40 1.E+02 30 20 tP(ms) 1.E+01 0.01 0.10 1.00 10.00 10 0 0 25 50 75 Tj(C) 100 125 150 175 2/5 SM2T series Fig. 3: Average power dissipation versus ambient temperature. P(W) 3.0 Tamb = Ttab Fig. 4: Variation of thermal impedance junction to ambient versus pulse duration. Zth(j-a)(C/W) 1000.0 S=0.135cm 2.5 100.0 2.0 S=2cm 1.5 10.0 1.0 Printed circuit board FR4, recommended pad layout 1.0 0.5 Tamb(C) 0.0 0 25 50 75 100 125 150 tP(s) 0.1 1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02 1.E+03 Fig. 5: Thermal resistance junction to ambient versus copper surface under tab. Rth(j-a)(C/W) 250 Fig. 6: Reverse leakage current versus junction temperature (typical values). IR(nA) 1.E+02 VR=VRM 200 1.E+01 150 1.E+00 100 1.E-01 50 S(cm) 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 1.E-02 0 25 50 Tj(C) 75 100 125 150 Fig. 7: Clamping voltage versus peak pulse current (maximum values). IPP(A) 100.0 8/20s Tj initial =25C Fig. 8: Junction capacitance versus reverse voltage applied (typical values). C(pF) 10000 F=1MHz Vosc=30mVRMS Tj=25C 10/1000s 10.0 1000 SM2T6V8A SM2T6V8A SM2T14A SM2T18A 1.0 SM2T14A 100 SM2T27A SM2T18A SM2T27A VCL(V) 10 VR(V) 45 1 10 100 0.1 0 5 10 15 20 25 30 35 40 3/5 SM2T series Fig. 9: Forward voltage drop versus forward current (typical values). IFM(A) 1.E+02 1.E+01 Tj=150C 1.E+00 Tj=25C 1.E-01 VFM(V) 1.E-02 0.0 0.5 1.0 1.5 2.0 2.5 3.0 PACKAGE MECHANICAL DATA DO216-AA (ST mite) DIMENSIONS REF. Min. L3 D Millimeters Typ. 1.00 Max. 1.15 0.10 0.40 0.70 0.10 1.75 1.75 3.60 0.50 1.20 1.90 1.90 3.75 0.63 1.35 0.50 ref 0.07 0.07 0.003 0.003 0.65 1.00 0.25 2.05 2.05 3.90 0.80 1.50 0.016 0.027 0.004 0.069 0.069 0.142 0.047 0.047 Min. 0.033 Inches Typ. 0.039 Max. 0.045 0.004 0.025 0.039 0.010 0.007 0.007 0.148 0.025 0.053 0.019 ref 0.081 0.081 0.154 0.031 0.059 A A1 0.85 b2 b b b2 H c L2 L R E D E H C A1 R1 0 to 6 A L L2 L3 Note: The anode is connected to the longer tab The cathode is connected to the shorter tab (heatsink) R R1 RECOMMENDED LAYOUT 2.67 0.762 2.54 1.27 0.635 4/5 SM2T series OTHER INFORMATION Ordering type SM2T6V8A SM2T14A SM2T18A SM2T27A Marking MUA MUE MUG MUJ Package ST mite ST mite ST mite ST mite Weight 15.5 mg 15.5 mg 15.5 mg 15.5 mg Base qty 12000 12000 12000 12000 Delivery mode Tape & reel Tape & reel Tape & reel Tape & reel Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 5/5 |
Price & Availability of SM2T14A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |